Often seen on coppers or kettles in Breweries, a DIN80 or DN80 Immersion Heater is good to 20 BAR. Available with 3 or 6 looped or U bent elements with 1 or 2 stat pockets, allowing for control AND overtemp cutout if needed. With that many elements we can squeeze on a lot of power. Or if you prefer, achieve a very low watt density.
Also referred to as 3″NB.
Call Jamie on 01827 215684 to discuss your needs.
British manufactured bespoke solutions in a coupla weeks.
The major benefit of these heaters is the ability to remove them with comparative ease. This makes them very popular with brewers & distillers, as cleaning in situ is a bugger. I know from grim experience with Alex & Nathan at Green Duck. They beat me with a big stick when I miss bits. The screams in an empty & warm vessel are blood curdling.
If you decide screwed heaters are a better solution, click here.
DIN80 or DN80 Immersion Heater Flange Table
| 3″ | Flange Diameter | PCD | No. of Bolt Holes | Diameter of Bolts | Diameter of Holes | Diameter of Raised Face | Height of Raised Face |
|---|---|---|---|---|---|---|---|
| PN6 | 190mm | 150mm | 4 | M16 | 18mm | 128mm | 3mm |
| PN10 | 200mm | 160mm | 8 | M16 | 18mm | 138mm | 3mm |
| PN16 | 200mm | 160mm | 8 | M16 | 18mm | 138mm | 3mm |
| PN25 | 200mm | 160mm | 8 | M16 | 18mm | 138mm | 3mm |
| PN40 | 200mm | 160mm | 8 | M16 | 18mm | 138mm | 3mm |
| PN64 | 215mm | 170mm | 8 | M20 | 22mm | 138mm | 3mm |
| Table D | 7 1/4″ (184mm) | 5 3/4″ (146mm) | 4 | 5/8″ (16mm) | 11/16″ (17mm) | ||
| Table E | 7 1/4″ (184mm) | 5 3/4″ (146mm) | 4 | 5/8″ (16mm) | 11/16″ (17mm) | ||
| Table F | 8″ (203mm) | 6 1/2″ (165mm) | 8 | 5/8″ (16mm) | 11/16″ (17mm) | ||
| Table H | 8″ (203mm) | 6 1/2″ (165mm) | 8 | 5/8″ (16mm) | 11/16″ (17mm) | 5″ (127mm) | 1/16″ (2mm) |
| ANSI 125/150 | 7 1/2″ (191mm) | 6″ (152mm) | 4 | 5/8″ (16mm) | 3/4″ (19mm) | 5″ (127mm) | 1/16″ (2mm) |
| ANSI 300 | 8 1/4″ (210mm) | 6 5/6″ (168mm) | 8 | 3/4″ (19mm) | 7/8″ (22mm) | 5″ (127mm) | 1/16″ (2mm) |